Milwaukee 6955-20

Milwaukee 6955-20

The 6955-20 12″ Dual-Bevel Sliding Compound Miter Saw offers best in class precision, power and convenience. The Miter Angle Digital Readout gives repeatable precision to 0.1°. The Miter Angle Fine Adjust with Detent Override makes it easy to dial-in exact miter edges. Double Integral Jobsite Lights completely enlighten the work piece and cut line from either side of the cutting edge. The capable 15.0 Amp, 3.3 Max HP Direct Drive Motor delivers up to 3200 RPM, gives expanded energy to elite cutting in hard timber. Steady Power Technology with Soft Start keeps up consistent cutting rate under burden and declines start up head development. The Integral Dust channel catches up to 75% of the dust and trash cut.

The Milwaukee 6955-20 12-Inch Sliding Miter Saw has gotten a greater part of positive audits. Numerous clients have adulated the machine and the Milwaukee brand for acquainting with them a fantastic miter saw that does precisely as it publicizes. This saw functions admirably and keeps going long, not separating even after consistent use.

Product Specs

  • Miter angle fine adjust with detent override makes it simple to dial-in precise miter angles
  • Miter angle digital readout provides repeatable accuracy to 0.1 degree
  • Dual integral job-site lights fully illuminate the work piece and cut line from either side of the blade
    15-amp, 3.3 max hp direct-drive motor provides increased power for high-performance cutting in hard lumber
  • Integral dust channel captures 75 percent of all dust and debris

Costumer Reviews

Great saw ★★★★★

I am a rough and trim carpenter and I got this saw about 5 months ago. I have used many different 12″ sliders from the new Makita, new Bosch, new DeWalt. This is the best one I have used.

Let me start by saying this saw DOES HAVE A 0 DEGREE BEVEL POSITION STOP!!!! Do not get discouraged by all of the other comments on here that say it doesn’t, because apparently they don’t know how the saw’s bevel adjustment handle works. It has 2 positions. You can pull it all the way up, allowing you to move it to any degree you wish, OR if you pull it halfway up, it will click into your various detents INLCUDING 0 degrees!

I will start with the weaknesses, which aren’t much:

First, as mentioned by one of the other reviewers, the right side of the fence does not slide. This is due to the fact that when the saw is beveled to the right, the motor housing gets in the way and hits the fence. You can remove the upper part of the fence on that side, but then you are left with just about a 1 inch auxillary fence, so when you use a right bevel you will always have to support the workpiece on the left side and have the right side being the cut-off end. Kind of discouraging, but you will just have to make your cuts accordingly.

Another weakness (but small) is again already mentioned, no clamp is included for the workpiece. I have never used one before because I have always been set up with a stand that provides plenty of support, but for those of you who use one often, it is something to check into. I’m not sure if they even make one for it… ? Neither of these weaknesses were enough for me to lower the rating to 4 stars, though.

Waited A Long Time For This One! ★★★★

As a Home Improvement Contractor, I use these types of saws daily for multiple applications.

When it came time to upgrade miter saws I did a ton of research on the various models that were available. Reviews from online articles, tool magazines, talking to other professionals on the job to get their input.

I had all but settled on the Bosch 12″ sliding Miter Saw about 3 months ago, when I heard the rumor that Milwaukee was right about to run this saw out. So I waited. Again-(I had heard this rumor before)

When I first saw the press release on Milwauke’s website, I was excited. The $699.00 price tag didn’t matter much as you expect to pay for quality, and the 12″ Dual Bevel Sliders are pretty much running in that neighborhood. (There are some retailers that are trying to get like $770.00 for these saws so be careful and make sure they aren’t gouging you.)

After selling a couple of deck jobs I made some calls and found that our local Home Depot had just got the saws in that morning.

I will say that I was surprised when I picked up the box, it was considerably smaller and lighter than I had expected it to be. I got the saw back to the shop and pulled it from the box. The first thing I noticed is that there is not a hold down or workpiece clamp that comes with the saw. Not sure if they make an add on package or what. But a hold down clamp is nice and I missed it during my test runs. Once unboxed, I promptly mounted it my stand. Again very light for a saw of this size which is cool because I move my saw around allot.

All of the factory settings were accurate. Square to the table, square to the fence….etc. Real happy with that. The digital miter gauge is pretty cool, but is not really necessary for most everyday uses

Benefits of Milwaukee 6955-20

Another item conveyed to you by the Milwaukee Company is the Milwaukee 6955-20 12-Inch Sliding Dual Bevel Miter Saw. This is one miter saw that guarantees clients of a capable and fast method for getting the cuts and points you require, when you require them.

  • One thing that Milwaukee saws are known for are their dual integral job site lights. This feature is very helpful for people who work in places with low visibility.
  • The digital miter gauge is a great add on.
  • The Milwaukee easily folds up for storage
  • The dust channel works well in capturing debris that fall off of materials, while the miter angle fine adjustment system provides the most precise of cuts with every operation.
  • The Miter pivot/table is possibly the best in class, much smoother than similar machines.
  • As a sliding miter saw enjoy the extra cutting width. Sliding action is smooth and stable
  • The saw comes with a light that illuminates both sides of the blade.
  • The miter angle can be adjusted in increments of 0.1 degree as seen on the digital readout display.It self-zeroes on the whole range. There are also detent overrides.
  • The single-lever bevel adjustment has nine positive stops between 0 and 48 degrees. The saw bevels, or tilts, to both sides.
  • There are twin lights, one on either side of the blade, to show the cutline and blade thickness right on the material to be cut.
  • The motor has a soft start, taking about two seconds to build to full speed. This makes for less damage to the work-piece. There’s also an electric brake that halts the blade after the cut.
  • The adjustments can be made with one hand on the work-piece and one hand making the changes.
  • The rails are steel and they slide on ball bearings. Some reviewers have said the saw feels sturdy and the blade does not wander.
  • Milwaukee says the saw collects up to 75% of the dust and debris and channels it to the back of the saw.
  • The 15amp motor stays at 3250rpm, under load or not, for cleaner cuts.
  • Depth of cut at 45 degrees or 90 degrees is 6.55 inches.
  • The blade arbor fits 5/8” or 1.”
  • The saw comes with a carbide-tipped blade, blade wrench, manual, and dust collection bag.

Trying out Milwaukee 6955-20

With Milwaukee 6955-20 you can never get wrong. The use of this miter saw eases work more conveniently. It’s been presented here step by step. I would say that this miter saw nailed it.

Review on Milwaukee 6955-20

Bottom line

Reviews say the Milwaukee 6955-20 is dependable, well built and accurate, with a digital miter that measures to one-tenth of a degree. Kent Brobeck at the Journal of Light Construction finds that “The slide mechanism and table operate smoothly, and the cutting action is tight and stable.” The Milwaukee’s cutting capacity doesn’t quite match the Bosch GCM12SD’s (Est. $800) expanded reach but is significantly less expensive.


Brawny performance. Editors at Wood Magazine say the Milwaukee 6955-20 “has a beefy 15-amp gear-driven motor with soft-start that is strong enough to blast through tough 4-by-4 ipe [decking] without a hiccup.” It has one of the largest capacities for compound miter saws, crosscutting 13.5-inch-wide stock at 90 degrees and 9.5-inch boards at 45 degrees. Crown molding up to 6 5/8 inches can be cut on edge against the fence. “The large cut capacity makes this machine a good candidate for the smaller shops that do not have room for a radial arm saw,” notes Tom Hintz of

Ease of use

Standout features. Experts say the 6955-20’s digital scale changes effortlessly between settings, returning to an exact angle each time. “The microadjuster with detent override lets you zero in on uncommon miter angles,” say Wood Magazine editors. “And the miter table glides on needle bearings so smoothly you forget you’re using a miter saw.” Built-in work lights are mounted on each side of the blade, illuminating the cut area, and do so “without glare or shadow,” according to Wood Magazine. At 65 pounds, the Milwaukee 6955-20 is difficult to haul around jobsites and load into pickup trucks, though editors at the Journal of Light Construction find its shallow frame is “easier to carry than many lighter but deeper models.”


Solid and long-lasting. The Milwaukee 6955-20 is sturdy enough for professional use in the workshop and on the jobsite, reviews say. At and, numerous owners attest it’s reliable, with dead-on accuracy even after several years of use. One satisfied owner at exclaims that the Milwaukee is “hands-down the most beautifully crafted and engineered.” As is typical of compound miter saws, reviews say the 6955-20’s factory blade isn’t up to par for finish-quality cuts, and many owners upgrade for better performance. Milwaukee’s five-year warranty is the longest coverage for compound miter saws in our report.